Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 0.8118 inches and 0.8123 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.7210 inches
Flange Diameter:
Between 0.9360 inches and 0.9370 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.8400 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0895 inches single shaft and 0.0900 inches single shaft
Shaft Length:
0.4750 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
30.0 degrees celsius
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
20.0 milliamperes
Rotor Input Electrical Power Rating:
1.0 watts
Zro Resistance In Ohms:
25.00
Zso Resistance In Ohms:
6.40
Zrs Resistance In Ohms:
41.00
Rotor Dc Resistance In Ohms:
15.00
Stator Dc Resistance In Ohms:
6.50
Phase Shift Angle In Deg:
7.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-6.0/+6.0
Actuator Friction Torque At Minus 55 Deg Celsius:
9.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.0 centimeter-grams
Torque Gradient Per Angular Deg:
3400.0 millimeter-milligrams
Alignment Hole Quantity:
3
Pilot Length:
0.0380 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.2460 inches
Plus J Zro Reactance In Ohms:
128.00
Shaft Slot Depth:
0.0300 inches single shaft
Plus J Zso Reactance In Ohms:
23.00
Shaft Slot Width:
0.0200 inches single shaft
Plus J Zrs Reactance In Ohms:
14.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.3750 inches
Transformation Ratio:
0.454 stator to rotor
Alignment Hole Bolt Circle Diameter:
0.6780 inches
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Master Crane
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
CG-10-WS-1/A317
