Detail Specifications
Body Style:
Standard round a
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.6540 inches
Flange Diameter:
Between 1.0610 inches and 1.0620 inches
Flange Thickness:
Between 0.0880 inches and 0.0980 inches
Undercut Diameter:
Between 0.9995 inches and 1.0000 inches
Undercut Width:
Between 0.0450 inches and 0.0550 inches
Shaft Diameter:
0.1195 inches front shaft and 0.1200 inches front shaft
Shaft Diameter:
0.1195 inches rear shaft and 0.1200 inches rear shaft
Shaft Length:
0.4900 inches front shaft and 0.5100 inches front shaft
Shaft Length:
0.5000 inches rear shaft
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
240.0 milliamperes
Rotor Input Electrical Power Rating:
920.0 milliwatts
Zro Resistance In Ohms:
16.00
Zso Resistance In Ohms:
3.70
Rotor Dc Resistance In Ohms:
8.50
Stator Dc Resistance In Ohms:
3.00
Phase Shift Angle In Deg:
5.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 input
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Torque Gradient Per Angular Deg:
5700.0 millimeter-milligrams
Alignment Hole Quantity:
4
Mounting Surface To Terminal End Distance:
1.6000 inches
Shaft Slot Depth:
0.0220 inches front shaft and 0.0320 inches front shaft
Shaft Slot Depth:
0.0220 inches rear shaft and 0.0320 inches rear shaft
Shaft Slot Width:
0.0220 inches front shaft and 0.0320 inches front shaft
Shaft Slot Width:
0.0220 inches rear shaft and 0.0320 inches rear shaft
Shaft Type:
Round, slotted front shaft
Shaft Type:
Round, slotted rear shaft
Alignment Hole Depth:
0.0700 inches
Transformation Ratio:
0.450 stator to rotor
Alignment Hole Bolt Circle Diameter:
1.6240 inches
Terminal Type And Quantity:
5 wire lead
Item Name:
Generator,self-synchronous
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
