Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round b
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
2.1820 inches
Flange Diameter:
Between 1.4360 inches and 1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.5000 inches single shaft
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
40.0 milliamperes
Rotor Input Electrical Power Rating:
Between 660.0 watts and 960.0 watts
Zro Resistance In Ohms:
410.00
Zso Resistance In Ohms:
4.80
Rotor Dc Resistance In Ohms:
Between 225.00 and 250.00
Stator Dc Resistance In Ohms:
4.20
Phase Shift Angle In Deg:
4.800 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
100.00
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Torque Gradient Per Angular Deg:
3150.0 millimeter-milligrams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
Between 0.0003 inches and 0.0015 inches
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.6620 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zro Reactance In Ohms:
2870.00
Plus J Zso Reactance In Ohms:
25.30
Shaft Type:
Round single shaft
Transformation Ratio:
0.454 rotor to stator
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Test Data Document:
96214-530753 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
5 wire lead
Item Name:
Generator,self-synchronous
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
