Detail Specifications
Body Material:
Any acceptable
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.7110 inches
Flange Diameter:
Between 0.7450 inches and 0.7530 inches
Flange Thickness:
Between 0.0590 inches and 0.0650 inches
Undercut Diameter:
Between 0.6820 inches and 0.6920 inches
Undercut Width:
Between 0.0590 inches and 0.0650 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.4610 inches single shaft and 0.4850 inches single shaft
Maximum Tempurature Rise:
9.0 degrees celsius
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
114.0 milliamperes
Rotor Input Electrical Power Rating:
650.0 milliwatts
Zro Impedance Magnitude In Ohms:
269.00
Zro Impedance Angle In Deg:
75.00
Zso Impedance Magnitude In Ohms:
89.00
Zso Impedance Angle In Deg:
62.00
Rotor Dc Resistance In Ohms:
Between 50.15 and 67.85
Stator Dc Resistance In Ohms:
Between 15.30 and 20.70
Phase Shift Angle In Deg:
13.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
17.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
26.00
Electrical Error Angular Range In Minutes:
-5.0/+5.0
Actuator Friction Torque At Minus 55 Deg Celsius:
12.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.0 centimeter-grams
Pilot Length:
Between 0.0370 inches and 0.0430 inches
Mounting Surface To Terminal End Distance:
1.2400 inches
Shaft Slot Depth:
0.0250 inches single shaft and 0.0350 inches single shaft
Shaft Slot Width:
0.0200 inches single shaft and 0.0300 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
Between 0.446 rotor to stator and 0.462 rotor to stator
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Master Crane
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
