Product Technical Spec.
Body Style:
Standard round c
Shoulder Diameter:
1.9995 inches
Pilot Diameter:
0.7500 inches
Overall Length:
3.2370 inches
Flange Diameter:
2.1610 inches
Flange Thickness:
0.1250 inches
Undercut Diameter:
2.0000 inches
Undercut Width:
0.0950 inches
Shaft Diameter:
1.8500 inches single shaft
Shaft Length:
0.5000 inches single shaft
Schematic Diagram Designator:
1 y-rotor, 1 stator
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
1.0 amperes
Rotor Input Electrical Power Rating:
4.0 watts finished-chamfered
Zro Resistance In Ohms:
1.00
Zso Resistance In Ohms:
5.00
Rotor Dc Resistance In Ohms:
0.58
Stator Dc Resistance In Ohms:
0.26
Phase Shift Angle In Deg:
1.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
19.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
26.00
Electrical Error Angular Range In Minutes:
-10.0/+10.0
Actuator Friction Torque At Minus 55 Deg Celsius:
45.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
15.0 centimeter-grams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0010 inches
Shaft End Play:
0.0010 inches
Pilot Length:
0.0600 inches
Shoulder Length:
0.2000 inches
Mounting Surface To Terminal End Distance:
1.6340 inches
Shaft Maximum Runout:
0.0015 inches
Plus J Zro Reactance In Ohms:
5.00
Shaft Slot Depth:
0.0470 inches single shaft
Plus J Zso Reactance In Ohms:
35.00
Shaft Slot Width:
0.0320 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
0.454 stator to rotor
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Master Crane
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
