Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
2.0550 inches
Flange Diameter:
Between 0.7450 inches and 0.7550 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.7000 inches
Undercut Width:
0.0570 inches
Shaft Diameter:
0.1197 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.4570 inches single shaft and 0.4850 inches single shaft
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
190.0 milliamperes
Rotor Input Electrical Power Rating:
1.0 watts
Zro Resistance In Ohms:
32.00
Zso Resistance In Ohms:
7.30
Zrs Resistance In Ohms:
55.00
Rotor Dc Resistance In Ohms:
24.00
Stator Dc Resistance In Ohms:
7.50
Phase Shift Angle In Deg:
11.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius:
9.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.00 centimeter-grams
Torque Gradient Per Angular Deg:
0.034 inch-ounces
Pilot Length:
0.0430 inches
Mounting Surface To Terminal End Distance:
1.3700 inches
Plus J Zro Reactance In Ohms:
150.00
Shaft Slot Depth:
0.0150 inches single shaft and 0.0350 inches single shaft
Plus J Zso Reactance In Ohms:
26.20
Shaft Slot Width:
0.0150 inches single shaft and 0.0350 inches single shaft
Plus J Zrs Reactance In Ohms:
15.00
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
0.454 stator to rotor
Terminal Type And Quantity:
5 solder stud
Item Name:
Synchro Master Crane
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
