Technical Specifications of NSN
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
Between 1.9800 inches and 2.0100 inches
Flange Diameter:
Between 1.0590 inches and 1.0620 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.0800 inches single shaft and 0.0810 inches single shaft
Shaft Length:
0.3600 inches single shaft and 0.3900 inches single shaft
Shaft Undercut Width:
0.0300 inches single shaft
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
120.0 milliamperes
Rotor Input Electrical Power Rating:
600.0 milliwatts
Zro Resistance In Ohms:
44.00
Zso Resistance In Ohms:
57.00
Rotor Dc Resistance In Ohms:
18.00
Stator Dc Resistance In Ohms:
9.30
Phase Shift Angle In Deg:
4.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
25.00
Electrical Error Angular Range In Minutes:
-15.0/+15.0
Actuator Friction Torque At Minus 55 Deg Celsius:
1.8 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
0.6 centimeter-grams
Torque Gradient Per Angular Deg:
2000.0 millimeter-milligrams
Alignment Hole Quantity:
4
Pilot Length:
Between 0.0590 inches and 0.0650 inches
Shoulder Length:
Between 0.0590 inches and 0.0650 inches
Mounting Surface To Terminal End Distance:
1.6200 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
3a single shaft
Plus J Zro Reactance In Ohms:
243.00
Plus J Zso Reactance In Ohms:
28.00
Shaft Tapered End Minor Diameter:
0.0780 inches single shaft
Shaft Type:
Round, tapered, threaded, undercut single shaft
Alignment Hole Depth:
0.0900 inches
Transformation Ratio:
0.454 rotor to stator
Shaft Taper Angle In Deg:
3.0 single shaft
Shaft Tip Length:
0.0650 inches single shaft
Alignment Hole Bolt Circle Diameter:
Between 0.8090 inches and 0.8150 inches
Shaft Taper Length:
0.1370 inches single shaft
Shaft Thread Size:
0.060 inches single shaft
Shaft Undercut Diameter:
0.0440 inches single shaft and 0.0460 inches single shaft
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Master Crane
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
