Product Features
Shaft end tap no. 1-72 nf-3b, 0.1720 in. Nom deep
Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
2.1550 inches
Flange Diameter:
Between 1.0600 inches and 1.0630 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.9620 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.4680 inches single shaft
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
205.0 milliamperes
Rotor Input Electrical Power Rating:
1.6 watts
Zro Resistance In Ohms:
40.00
Zso Resistance In Ohms:
4.80
Rotor Dc Resistance In Ohms:
Between 14.90 and 18.10
Stator Dc Resistance In Ohms:
Between 4.30 and 5.10
Phase Shift Angle In Deg:
6.500 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-25.0/+25.0
Actuator Friction Torque At Minus 55 Deg Celsius:
10000.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3000.00 centimeter-grams
Alignment Hole Quantity:
3
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.6870 inches
Shaft Hole Diameter:
0.0730 inches single shaft
Plus J Zro Reactance In Ohms:
120.00
Plus J Zso Reactance In Ohms:
25.00
Shaft Tapered End Minor Diameter:
0.1002 inches single shaft
Shaft Type:
Round single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.454 rotor to stator
Shaft Taper Angle In Deg:
3.0 single shaft
Alignment Hole Bolt Circle Diameter:
0.6950 inches
Shaft Taper Length:
0.1480 inches single shaft
Terminal Type And Quantity:
5 wire lead
Item Name:
Generator,self-synchronous
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
