Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.0280 inches
Flange Diameter:
Between 1.0570 inches and 1.0650 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.2110 inches single shaft and 0.2290 inches single shaft
Maximum Tempurature Rise:
7.0 degrees celsius
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
136.0 milliamperes
Rotor Input Electrical Power Rating:
450.0 milliwatts
Zro Resistance In Ohms:
37.00
Zso Resistance In Ohms:
8.00
Rotor Dc Resistance In Ohms:
19.00
Stator Dc Resistance In Ohms:
5.75
Phase Shift Angle In Deg:
4.700 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
26.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
46.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Pilot Length:
Between 0.0590 inches and 0.0650 inches
Shoulder Length:
Between 0.0590 inches and 0.0650 inches
Mounting Surface To Terminal End Distance:
1.7990 inches
Plus J Zro Reactance In Ohms:
233.00
Shaft Slot Depth:
0.0300 inches single shaft
Plus J Zso Reactance In Ohms:
39.00
Shaft Slot Width:
0.0250 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
0.454 rotor to stator
Terminal Type And Quantity:
5 screw
Item Name:
Generator,self-synchronous
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
