Product Technical Spec.
Body Material:
Any acceptable
Body Style:
Standard round b
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
2.8150 inches
Flange Diameter:
Between 1.4360 inches and 1.4370 inches
Flange Thickness:
Between 0.0880 inches and 0.0980 inches
Undercut Width:
Between 0.0680 inches and 0.0880 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.9400 inches single shaft and 0.9800 inches single shaft
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
232.0 milliamperes
Rotor Input Electrical Power Rating:
700.0 milliwatts
Zro Resistance In Ohms:
13.00
Zso Resistance In Ohms:
3.90
Zrs Resistance In Ohms:
19.00
Rotor Dc Resistance In Ohms:
6.50
Stator Dc Resistance In Ohms:
3.00
Phase Shift Angle In Deg:
3.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 output
Electrical Error Angular Range In Minutes:
-10.0/+10.0
Pilot Length:
Between 0.0350 inches and 0.0450 inches
Shoulder Length:
Between 0.1270 inches and 0.1370 inches
Mounting Surface To Terminal End Distance:
1.2800 inches
Plus J Zro Reactance In Ohms:
111.00
Shaft Slot Depth:
0.0220 inches single shaft and 0.0320 inches single shaft
Plus J Zso Reactance In Ohms:
19.00
Shaft Slot Width:
0.0220 inches single shaft and 0.0320 inches single shaft
Plus J Zrs Reactance In Ohms:
10.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.0950 inches
Transformation Ratio:
0.454 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8780 inches
Terminal Type And Quantity:
5 screw
Item Name:
Synchro Master Crane
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
