Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round b
Shoulder Diameter:
Between 2.6840 inches and 2.6900 inches
Pilot Diameter:
Between 1.4995 inches and 1.5000 inches
Overall Length:
6.6730 inches
Flange Diameter:
Between 2.9350 inches and 2.9380 inches
Shaft Diameter:
0.2403 inches single shaft and 0.2405 inches single shaft
Shaft Length:
0.7300 inches single shaft
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
1650.0 milliamperes
Rotor Input Electrical Power Rating:
12.0 watts
Phase Shift Angle In Deg:
2.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
50.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
125.00
Electrical Error Angular Range In Minutes:
-10.0/+10.0
Spline Tooth Quantity:
22 single shaft
Torque Gradient Per Angular Deg:
0.600 inch-ounces
Shaft Radial Play Test Point:
0.605 inches
Shaft Maximum Radial Play:
0.0006 inches
Shaft End Play:
Between 0.0020 inches and 0.0060 inches
Shoulder Length:
Between 0.2240 inches and 0.2300 inches
Mounting Surface To Terminal End Distance:
5.8780 inches
Spline Tooth Diametral Pitch:
96 single shaft
Shaft Maximum Runout:
0.0008 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3400 inches single shaft
Shaft Type:
Spline w/threads single shaft
Transformation Ratio:
0.783 rotor to stator
Shaft Thread Size:
0.239 inches single shaft
Shaft Radial Play Determining Weight:
16.0 ounces
Shaft End Play Determining Weight:
16.0 ounces
Test Data Document:
81349-mils20708-59 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
6 screw
Item Name:
Generator,self-synchronous
Manufacturer Part Numbers
No other part numbers with same form, fit, and function found.
