Product Technical Spec.
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.2180 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.4310 inches single shaft and 0.4370 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
10.0 degrees celsius
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
165.0 milliamperes
Rotor Input Electrical Power Rating:
800.0 milliwatts
Zro Impedance Magnitude In Ohms:
218.00
Zro Impedance Angle In Deg:
81.00
Zso Impedance Magnitude In Ohms:
37.50
Zso Impedance Angle In Deg:
80.70
Rotor Dc Resistance In Ohms:
20.00
Stator Dc Resistance In Ohms:
4.00
Phase Shift Angle In Deg:
6.500 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius:
15.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.00 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.7810 inches
Shaft Slot Depth:
0.0300 inches single shaft
Shaft Slot Width:
0.0250 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
1.700 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Terminal Type And Quantity:
5 solder stud
Item Name:
Synchro Master Crane
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
