Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
1.0000 inches
Pilot Diameter:
0.6250 inches
Overall Length:
2.7410 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1200 inches both shafts
Shaft Length:
0.4000 inches rear shaft
Shaft Length:
0.5000 inches front shaft
Fragility Factor:
Moderately rugged
End Application:
An/fps-85
Maximum Tempurature Rise:
15.0 degrees celsius
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
280.0 milliamperes
Rotor Input Electrical Power Rating:
950.0 allqjaa3.500 finished-chamfered
Zro Impedance Magnitude In Ohms:
107.00
Zro Impedance Angle In Deg:
81.70
Zso Impedance Magnitude In Ohms:
18.10
Zso Impedance Angle In Deg:
79.50
Rotor Dc Resistance In Ohms:
9.00
Stator Dc Resistance In Ohms:
3.00
Phase Shift Angle In Deg:
5.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
17.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
26.00
Electrical Error Angular Range In Minutes:
-10.0/+10.0
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
Between 0.0005 inches and 0.0015 inches
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.7680 inches
Shaft Maximum Runout:
0.0010 inches
Shaft Slot Depth:
0.0300 inches both shafts
Shaft Slot Width:
0.0250 inches both shafts
Shaft Type:
Round, slotted both shafts
Transformation Ratio:
0.454 stator to rotor
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
16.0 ounces
Terminal Type And Quantity:
5 wire lead
Item Name:
Generator,self-synchronous
Cross Referenced Parts
No other part numbers with same form, fit, and function found.
