Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round b
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
0.6250 inches
Overall Length:
2.0150 inches
Flange Diameter:
Between 1.0590 inches and 1.0650 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.3130 inches single shaft
Maximum Tempurature Rise:
125.0 degrees celsius
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
52.0 milliamperes
Rotor Input Electrical Power Rating:
800.0 milliwatts
Zro Resistance In Ohms:
296.00
Zso Resistance In Ohms:
170.00
Zrs Resistance In Ohms:
470.00
Rotor Dc Resistance In Ohms:
200.00
Stator Dc Resistance In Ohms:
150.00
Phase Shift Angle In Deg:
5.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
94.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius:
15.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.0 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
Between 0.0590 inches and 0.0650 inches
Shoulder Length:
Between 0.0590 inches and 0.0650 inches
Mounting Surface To Terminal End Distance:
1.5750 inches
Plus J Zro Reactance In Ohms:
2190.00
Shaft Slot Depth:
0.0310 inches single shaft
Plus J Zso Reactance In Ohms:
1117.00
Shaft Slot Width:
0.0310 inches single shaft
Plus J Zrs Reactance In Ohms:
195.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.783 stator to rotor
Alignment Hole Bolt Circle Diameter:
Between 0.8090 inches and 0.8150 inches
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Master Crane
Manufacturer Part Numbers
No other part numbers with same form, fit, and function found.
