Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round d
Shoulder Diameter:
1.9900 inches
Pilot Diameter:
0.6000 inches
Second Shoulder Diameter:
1.9995 inches
Second Shoulder Length:
0.1720 inches
Overall Length:
4.2940 inches
Flange Diameter:
2.2500 inches
Flange Thickness:
0.2500 inches
Body Diameter:
1.9900 inches
Shaft Diameter:
0.2405 inches single shaft
Shaft Length:
0.6730 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
45.0 degrees celsius
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
264.0 milliamperes
Rotor Input Electrical Power Rating:
2.5 watts
Zro Resistance In Ohms:
50.10
Zso Resistance In Ohms:
33.80
Zrs Resistance In Ohms:
38.50
Zss Resistance In Ohms:
19.30
Zso-9 Designator Resistance In Ohms:
17.90
Maximum Fundamental Null Voltage In Millivolts Per Volt:
75.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
100.00
Electrical Error Angular Range In Minutes:
-8.0/+8.0
Spline Tooth Quantity:
22 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
0.50 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
0.20 inch-ounces
Pilot Length:
0.0460 inches
Shoulder Length:
0.2500 inches
Aft Of First Flange Diameter:
1.9995 inches
Mounting Surface To Terminal End Distance:
3.4450 inches
Spline Tooth Diametral Pitch:
96 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.2660 inches single shaft
Plus J Zro Reactance In Ohms:
544.00
Plus J Zso Reactance In Ohms:
246.00
Plus J Zrs Reactance In Ohms:
35.50
Shaft Type:
Spline w/threads single shaft
Plus J Zss Reactance In Ohms:
16.40
Transformation Ratio:
0.783 rotor to stator
Plus J Zso-9 Designator Reactance In Ohms:
86.90
Shaft Thread Size:
0.250 inches single shaft
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
6 screw
Specification Data:
81349-mil-s-20708/94 government specification
Item Name:
Synchro Master Crane
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC