Product Technical Spec.
Body Material:
Any acceptable
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.5350 inches
Flange Diameter:
Between 1.0590 inches and 1.0620 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
Between 0.0450 inches and 0.0550 inches
Shaft Diameter:
0.1870 inches front shaft
Shaft Diameter:
0.1872 inches rear shaft
Shaft Length:
0.6450 inches single shaft and 0.6650 inches single shaft
Maximum Tempurature Rise:
100.0 degrees celsius
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
280.0 milliamperes
Rotor Input Electrical Power Rating:
1.2 watts finished-chamfered
Rotor Dc Resistance In Ohms:
Between 16.20 and 19.80
Stator Dc Resistance In Ohms:
Between 8.37 and 10.23
Phase Shift Angle In Deg:
4.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
12.00 output
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius:
0.07 inch-ounces
Torque Gradient Per Angular Deg:
0.0085 inch-ounces
Pilot Length:
0.0590 mils and 0.0650 centimeters
Shoulder Length:
0.0590 mils and 0.0650 centimeters
Mounting Surface To Terminal End Distance:
1.7890 inches
Shaft Type:
Round single shaft
Terminal Type And Quantity:
5 tab w/screw
Item Name:
Generator,self-synchronous
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC