Used to control gas flow; 2.375 in. O/a lg; 2.750 in. W; 3.250 in. H; metal frame, shaft and springs; nylon gears; 120 vac, 50/60 hz motor w/two 22/20 stranded wire leads 7 in. Lg; 120 vac, 50/60 hz solenoid, two 0.187 in. Quick diconnect terminals; 125-250 vac, 20 amp spdt switch w/three 0.250 in. Quick disconnect terminals; timing cycle 2.4 sec min.- 60 sec max.; ambient temp range 20/160 degrees f; panel mtd w/3 6-32 thd holes set 120 degrees apart, centered in a 0.687 in.Radius, 1 hole at 6 oclock position centered on shaft; momentary operation of switch s1 causes clutch to operate, transfering s2 to n.C.Position and energizing timing motor and load; switch s2 holds the clutch operated until the time cycle is completed and the timing motor transfers s2 to n.O.Position, releasing the clutch and deenergizing the timing motor and load; fragility factor-moderately delicate
NSN 5999-00-925-2502
NSN 6130-01-110-9109
NSN 5996-00-098-3864
NSN 6105-01-660-1106
NSN 6135-01-449-2144
NSN 5998-01-324-3050
NSN 5910-01-514-7309
NSN 5915-00-922-1629
NSN 6650-01-243-7789
NSN 5990-01-334-8634
NSN 6145-00-975-0912
NSN 6685-00-153-3914
Last Updated: 05/07/2024