Adapter shall be a filter/surge suppressor to perform emi and surge protection on telephone signals. The filter/suppressor shall operate with normal switched telephone signal levels. It must pass the ac ring voltage of approximately 170 vac as well as audio up to 4khz. There shall be 4 pins on each filter. All 4 pins shall be filtered and protected for surge. Surge protection shall be shunted to case ground. Current rating - load current 0.5 amperes per pin; operating voltage - 200 vac; dc resistance - 0.2 ohms or less. The input end of the housing shall have a rj-11 socket telephone connector and a mounting flange. The flange shall have two 4-40 screw inserts. The output end shall have a rj-11 connector. The pins shall be wired pin to pin
Rectangular shape body style, 3.800 inches overall length, 0.580 inches overall height, 0.480 inches body width, 1 mating end quantity
Rectangular shape body style, 3.800 inches overall length, 0.480 inches overall height, 0.580 inches body width, 1 mating end quantity
Rectangular shape body style, 3.800 inches overall length, 0.480 inches overall height, 0.580 inches body width, 1 mating end quantity
3a thread class, right-hand , straight shape w/screw locks body style, 1.085 inches overall length, 0.735 inches overall height
3a thread class, right-hand , straight shape w/screw locks body style, 1.085 inches overall length, 0.735 inches overall height
3a thread class, right-hand , straight shape w/screw locks body style, 1.085 inches overall length, 0.735 inches overall height
NSN 5950-00-387-3121
NSN 7035-00-908-4933
NSN 5945-00-051-5437
NSN 5855-00-688-9954
NSN 5895-00-236-8877
NSN 5895-01-576-8777
NSN 5996-01-224-7914
NSN 6105-00-283-2849
NSN 5905-00-308-4856
NSN 5925-00-813-6810
NSN 5835-01-528-7454
NSN 6110-01-137-1921
Last Updated: 01/21/2025