Adapter shall be a filter/surge suppressor to perform emi and surge protection on telephone signals. The filter/suppressor shall operate with normal switched telephone signal levels. It must pass the ac ring voltage of approximately 170 vac as well as audio up to 4khz. There shall be 4 pins on each filter. All 4 pins shall be filtered and protected for surge. Surge protection shall be shunted to case ground. Current rating - load current 0.5 amperes per pin; operating voltage - 200 vac; dc resistance - 0.2 ohms or less. The input end of the housing shall have a rj-11 socket telephone connector and a mounting flange. The flange shall have two 4-40 screw inserts. The output end shall have a rj-11 connector. The pins shall be wired pin to pin
Rectangular shape body style, 3.800 inches overall length, 0.580 inches overall height, 0.480 inches body width, 1 mating end quantity
Rectangular shape body style, 3.800 inches overall length, 0.480 inches overall height, 0.580 inches body width, 1 mating end quantity
Rectangular shape body style, 3.800 inches overall length, 0.480 inches overall height, 0.580 inches body width, 1 mating end quantity
3a thread class, right-hand , straight shape w/screw locks body style, 1.085 inches overall length, 0.735 inches overall height
3a thread class, right-hand , straight shape w/screw locks body style, 1.085 inches overall length, 0.735 inches overall height
3a thread class, right-hand , straight shape w/screw locks body style, 1.085 inches overall length, 0.735 inches overall height
NSN 5910-01-433-2454
NSN 5910-01-303-7422
NSN 6610-01-574-0050
NSN 6135-00-377-9165
NSN 5835-01-178-4154
NSN 4140-01-614-8945
NSN 6145-01-338-8344
NSN 6610-01-204-9146
NSN 5996-01-406-2845
NSN 6685-01-480-1465
NSN 6240-01-300-8528
NSN 5905-01-417-2145
Last Updated: 12/12/2024