A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5910-01-447-9192
NSN 2925-01-077-3310
NSN 5975-00-332-7221
NSN 5925-00-936-1628
NSN 6685-01-245-9862
NSN 5910-00-937-1329
NSN 5960-01-495-0859
NSN 6685-01-608-4694
NSN 5895-01-540-8952
NSN 5998-01-069-4534
NSN 6150-00-111-3194
NSN 6105-01-114-8644