With a split; 1.800 in. Lg.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Tube or pipe fittings of nickel
NSN 6650-01-366-4663
NSN 5930-01-068-0054
NSN 5965-01-124-6274
NSN 5960-01-256-6956
NSN 5920-00-900-9255
NSN 6320-01-495-0512
NSN 6320-01-561-9011
NSN 5960-01-628-2760
NSN 6650-01-178-8731
NSN 6145-01-112-1192
NSN 5999-01-422-4506
NSN 6685-01-652-7474