With a split; 1.800 in. Lg.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Tube or pipe fittings of nickel
NSN 5895-01-057-9033
NSN 5935-01-261-6452
NSN 5950-01-177-4691
NSN 6220-01-486-4188
NSN 6320-00-194-4252
NSN 6130-01-045-7968
NSN 5996-01-238-9607
NSN 6110-01-095-3519
NSN 5998-01-170-5834
NSN 5965-00-052-9184
NSN 5835-00-752-6065
NSN 6130-01-644-4992