Four equally spaced 0.031 in. W flats opposite and parallel to each other, shim assembled by alternate indexing flats
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5945-00-410-5125
NSN 6650-00-885-3775
NSN 2925-01-645-2948
NSN 5835-01-104-5707
NSN 6105-01-401-5361
NSN 5855-01-089-2248
NSN 5975-00-078-3343
NSN 5985-00-054-1557
NSN 6145-00-013-8655
NSN 5915-01-626-0572
NSN 5996-01-367-6557
NSN 5910-01-316-8082