One punched hole 0.281 in. Diameter located at top ofcenter line. Cutouts three each 0.500 in. Width located equally spaced on lower half of aperture diameter
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5985-01-048-1561
NSN 5945-00-930-0212
NSN 6110-01-165-6844
NSN 5950-00-802-1781
NSN 5965-01-252-8701
NSN 5920-00-228-1221
NSN 5996-01-281-7336
NSN 5998-00-987-7365
NSN 5910-00-025-0451
NSN 5990-00-348-1423
NSN 5920-01-373-0019
NSN 5945-01-319-1654