One punched hole 0.281 in. Diameter located at top ofcenter line. Cutouts three each 0.500 in. Width located equally spaced on lower half of aperture diameter
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 2925-00-536-4574
NSN 5999-01-375-1936
NSN 5925-01-089-2175
NSN 6685-00-252-9427
NSN 5925-01-063-6247
NSN 5985-01-242-3920
NSN 5998-01-061-4382
NSN 6685-00-977-6477
NSN 5945-01-236-0524
NSN 5999-01-219-9850
NSN 5999-01-245-6970
NSN 5910-00-186-0917