One mounting hole on one hinge leaf 9/16 in. Dia, located in center 2 in. From end of hinge, 1 in. From side of hinge, two mounting holes on other leaf 7/16 in. Dia, located 2 in. From center to center, 1 in. In from edge of hinge and 3/4 in. From end of hinge
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
NSN 5960-01-074-6110
NSN 6135-01-439-8669
NSN 5975-00-276-7559
NSN 5985-01-391-6074
NSN 6620-01-487-0605
NSN 6135-01-378-1454
NSN 5855-01-406-2606
NSN 6105-01-582-8303
NSN 6645-00-126-0286
NSN 6320-01-425-1417
NSN 6685-01-471-8417
NSN 5960-01-184-3436