A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6610-00-716-5248
NSN 6610-01-224-7247
NSN 5996-00-893-8088
NSN 5960-01-143-8622
NSN 5999-00-648-0062
NSN 5855-01-147-4785
NSN 2925-01-277-5882
NSN 5835-00-155-1379
NSN 5975-01-579-9910
NSN 6130-01-360-8488
NSN 6620-01-415-2307
NSN 5895-01-069-7998