Main drive for geroler in eaton char-lynn 2000 series geroler hydraulic motors with 245 cu.Cm./revolution displacement
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 4140-01-253-5697
NSN 5985-00-202-5867
NSN 5835-01-464-2662
NSN 6110-00-185-2021
NSN 5930-01-591-0607
NSN 6105-01-369-1587
NSN 5935-01-427-3822
NSN 4140-01-118-1896
NSN 6130-00-187-6457
NSN 5935-00-488-7280
NSN 6610-01-436-6884
NSN 6610-01-472-9219