Main drive for geroler in eaton char-lynn 2000 series geroler hydraulic motors with 245 cu.Cm./revolution displacement
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5935-01-391-2535
NSN 7035-00-968-4848
NSN 5975-01-558-1008
NSN 5910-01-572-5441
NSN 6645-01-287-9969
NSN 6620-01-062-2505
NSN 6320-00-593-0379
NSN 5835-00-419-0575
NSN 6610-00-817-8772
NSN 6110-01-047-3903
NSN 5998-01-648-1700
NSN 6105-01-513-6730