Light
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6620-00-846-3287
NSN 5930-00-008-6775
NSN 5965-00-763-5538
NSN 6110-00-498-6868
NSN 6620-00-406-2914
NSN 5990-00-554-0366
NSN 5960-01-287-4187
NSN 5950-00-052-4283
NSN 5855-01-308-0955
NSN 5950-01-400-5942
NSN 4140-01-167-4399
NSN 6130-00-997-7441