Light
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5925-00-831-8882
NSN 6240-01-339-9698
NSN 6220-00-006-9746
NSN 5925-01-066-6227
NSN 5915-01-590-2850
NSN 6105-01-532-4441
NSN 6620-00-923-5137
NSN 6145-00-966-2377
NSN 5910-01-457-2002
NSN 5999-01-050-7854
NSN 6610-01-601-6249
NSN 5999-01-292-8832