Second end has unthd hole 0.190 in. Diameter 0.275 in. Depth, in end of item; furnished with a woodruff key
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5999-01-252-4517
NSN 2925-01-134-9175
NSN 4140-01-324-2974
NSN 6320-01-271-0247
NSN 6620-01-287-9975
NSN 6130-01-381-6094
NSN 5965-00-263-6436
NSN 6105-01-413-3065
NSN 7035-01-611-2610
NSN 5990-00-023-4163
NSN 6110-01-568-8595
NSN 6130-01-474-8297