Second end has unthd hole 0.190 in. Diameter 0.275 in. Depth, in end of item; furnished with a woodruff key
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5975-01-395-4105
NSN 6150-01-378-7494
NSN 5960-00-372-4876
NSN 6145-01-242-9211
NSN 2925-00-193-2402
NSN 6135-01-477-1622
NSN 5965-00-360-9534
NSN 6320-01-431-4359
NSN 5990-01-609-4793
NSN 6320-01-029-4220
NSN 5905-01-212-6639
NSN 5930-01-180-4586