9 additional holes 0.469 in. Diameter on same bolt circle
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 6150-00-097-1391
NSN 6135-01-255-9129
NSN 6610-01-097-5073
NSN 6645-01-121-6952
NSN 6105-01-214-5788
NSN 6150-00-153-3196
NSN 5895-01-168-7286
NSN 5905-00-508-5658
NSN 6135-01-383-1910
NSN 6130-01-172-0367
NSN 6220-01-091-2470
NSN 5895-01-350-3527