9 additional holes 0.469 in. Diameter on same bolt circle
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5945-01-506-4409
NSN 6645-00-274-5670
NSN 6610-01-168-5015
NSN 6105-01-152-2800
NSN 6110-01-541-4930
NSN 7035-01-227-2546
NSN 6645-01-360-4562
NSN 5920-01-073-3334
NSN 5915-00-205-2615
NSN 6145-00-936-9686
NSN 5945-00-777-5131
NSN 5960-01-025-2526