A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 6130-01-265-3852
NSN 5910-01-406-4317
NSN 5990-01-316-9477
NSN 5975-01-525-0720
NSN 6320-01-516-3836
NSN 2925-01-442-7812
NSN 5985-01-186-4746
NSN 5990-01-230-8481
NSN 5950-00-133-5287
NSN 5855-00-973-5717
NSN 5999-01-607-6418
NSN 5925-01-651-3059