Furnished with a bright unplated finish
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 7035-01-553-4510
NSN 6145-01-068-4138
NSN 4140-01-436-3442
NSN 6130-00-882-7013
NSN 6110-01-218-4294
NSN 6105-01-265-5084
NSN 6320-00-270-8222
NSN 5935-00-026-8586
NSN 6150-01-577-9802
NSN 5855-01-515-4436
NSN 5855-00-791-5000
NSN 5915-00-396-2263