A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Austria 
Spain 
Singapore 
Kuwait 
Malaysia 
Australia 
Canada 
France 
Germany 
Republic of Korea 
Italy 
Denmark 
Greece 
Turkey Classification: Washers other than lock washers, iron or steel
NSN 5998-00-513-5680
NSN 6620-01-446-6571
NSN 6610-00-848-4764
NSN 5895-01-187-4642
NSN 5945-01-147-2500
NSN 6320-01-558-2141
NSN 5835-01-163-4215
NSN 5910-01-624-3583
NSN 2925-01-048-8464
NSN 6685-01-644-1566
NSN 5930-01-486-9601
NSN 5945-01-334-9697