A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5990-01-245-7299
NSN 5950-01-526-2242
NSN 6135-00-209-6918
NSN 5950-00-831-0476
NSN 6620-00-162-9877
NSN 6110-01-288-9919
NSN 5965-01-142-8044
NSN 5910-01-248-8382
NSN 5920-00-631-3528
NSN 6150-01-364-8688
NSN 6135-00-816-1519
NSN 5998-01-314-6662