A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5835-00-491-3834
NSN 5945-00-839-3394
NSN 5925-01-386-3178
NSN 5998-01-186-6597
NSN 5998-01-474-4097
NSN 5855-00-004-0904
NSN 5835-00-055-0953
NSN 5920-00-221-0877
NSN 5975-01-043-0097
NSN 5910-01-201-3545
NSN 5910-00-780-0977
NSN 5998-01-461-8083