A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-00-213-8695
NSN 6105-01-616-1879
NSN 6105-01-437-5501
NSN 6105-01-429-8577
NSN 5996-01-054-4954
NSN 5996-00-525-1777
NSN 6650-01-441-3624
NSN 5910-01-548-3770
NSN 5935-00-170-9920
NSN 5855-00-361-0167
NSN 6610-01-224-3814
NSN 5920-01-652-8395