A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5925-01-141-9643
NSN 6220-01-031-6919
NSN 2925-01-175-1217
NSN 6240-00-474-5078
NSN 5905-01-291-7663
NSN 6220-00-280-2880
NSN 6685-01-391-6790
NSN 4140-01-231-0742
NSN 4140-01-259-9260
NSN 5945-00-148-7714
NSN 5985-01-614-4975
NSN 5895-01-522-6034