A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5930-01-116-0890
NSN 5905-01-482-3991
NSN 6240-00-573-7514
NSN 5985-01-649-4011
NSN 6610-00-432-7162
NSN 6135-01-437-7741
NSN 6145-00-240-4532
NSN 6685-01-534-7192
NSN 6130-00-954-6479
NSN 5915-01-072-6073
NSN 5945-01-170-4432
NSN 5999-01-092-0836