A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-00-286-3272
NSN 5930-01-498-6524
NSN 5950-00-276-8584
NSN 6220-01-199-5356
NSN 5965-01-649-6410
NSN 5915-01-101-5826
NSN 5950-00-144-4139
NSN 5935-00-306-2222
NSN 5920-01-149-8386
NSN 2925-01-548-6674
NSN 6685-01-109-5739
NSN 5930-01-570-5802