First end bored 0.128 in. Diameter and 0.122 in. Deep; second end bored 0.220 in. Diameter and 0.440 in. Deep
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5996-01-115-6121
NSN 5985-01-462-9214
NSN 6650-00-312-1200
NSN 5925-01-397-2655
NSN 6105-01-469-7769
NSN 5960-01-268-4356
NSN 6650-01-300-1668
NSN 6150-00-318-0560
NSN 6105-01-660-9054
NSN 6240-01-466-8719
NSN 6130-00-928-6771
NSN 5960-01-224-0414