First end bored 0.128 in. Diameter and 0.122 in. Deep; second end bored 0.220 in. Diameter and 0.440 in. Deep
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 4140-00-676-9461
NSN 5998-00-628-7248
NSN 2925-01-106-3552
NSN 5895-00-917-2920
NSN 6240-00-903-4660
NSN 6135-01-324-7718
NSN 5935-00-266-8506
NSN 5965-01-572-2794
NSN 6145-00-232-0813
NSN 5835-00-572-7445
NSN 6320-01-527-0211
NSN 6135-01-579-3534