A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6105-01-437-6876
NSN 7035-01-509-1959
NSN 5965-01-346-4929
NSN 5985-01-545-8637
NSN 5835-01-625-8604
NSN 6620-01-210-5583
NSN 5920-01-286-1215
NSN 5930-00-584-9313
NSN 5935-01-178-9394
NSN 6240-01-371-0978
NSN 6110-01-396-0017
NSN 5960-00-825-6442