A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 4140-01-467-9616
NSN 5910-00-433-6971
NSN 5975-00-033-5722
NSN 5950-01-410-8776
NSN 5855-00-014-5008
NSN 5915-00-740-4336
NSN 5855-00-337-3679
NSN 5990-01-623-0082
NSN 6645-00-770-3742
NSN 7035-01-169-6551
NSN 5965-01-154-6319
NSN 6110-00-614-8573