A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
NSN 5835-01-264-8782
NSN 6240-01-399-8231
NSN 6105-01-286-8273
NSN 5935-01-602-5045
NSN 6130-00-876-2511
NSN 6105-00-175-9078
NSN 5996-01-266-7008
NSN 6110-00-990-2318
NSN 5920-00-142-9993
NSN 5960-00-988-2576
NSN 6105-01-134-5499
NSN 6145-00-213-9181