A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5998-00-155-6002
NSN 5965-01-128-3234
NSN 6220-00-754-3452
NSN 6645-01-410-8905
NSN 6145-00-155-5297
NSN 5985-01-351-3391
NSN 2925-01-462-1620
NSN 6620-01-372-4168
NSN 5915-01-645-0707
NSN 6645-01-657-2604
NSN 6150-01-245-8701
NSN 5999-00-008-5282